Multiplaz
Toll Free: +1 855 314 5551
MULTIPLAZ 3500 BLACK FRIDAY SALE!
LIMITED UNITS!
Tips and Tricks

Welding Rod Suggestion For Processes Using Multiplaz 3500

Tips and Tricks

Harris ER308L Stainless Steel TIG Welding Wire 3#
3 lb. tube of 36 inch lengths - Harris ER308L stainless steel TIG welding wire is used for the joining of common austenitic stainless steels such as types 304, 304L, 321, CF-8, and CF-3. Provides good resistance to intergranular corrosion.

 

Harris ER309L Stainless Steel TIG Welding Wire 3#
3 lb. tube 36 inch lengths - Harris ER309L stainless steel TIG welding wire is used for welding similar alloys in wrought or cast form; occasionally used for welding 18-8 base metals when severe corrosion conditions exist; and, at times, welding dissimilar steels. The 309L grade is similar to 309 except for the lower carbon content, (.03% maximum) which reduces the possibility of carbide precipitation which can cause weld corrosion.

 

Harris ER316L Stainless Steel TIG Welding Wire 3#
3 lb. tube 36 inch lengths - Harris ER316L stainless steel TIG welding wire is an austenitic stainless steel deposit with low carbon used for joining Types 316, 316L, CF-8M, and CF-3M

 

Harris ER4043 Aluminum TIG Welding Wire 3#
3 lb. tube of 36 inch lengths - Harris ER4043 aluminum TIG welding wire is qualified to AWS A5.10 R4043, ABS, ISO Designation AISi5. 4043 is a 5% silicon alloy used to weld heat treatable base alloys. It is most often used to weld the 6XXX series of alloys. The silicon addition improves puddle fluidity, producing an appealing bead profile. It is less crack sensitive on the 6XXX series than other welding alloys. Common applications are automotive parts, truck trailers, bicycles. Also ideally suited for brazing thin aluminum sheet and tubing.

 

Harris ER5356 Aluminum TIG Welding Wire 3#
3 lb. tube of 36 inch lengths - Harris ER5356 is an all position non-heat treatable aluminum TIG welding wire used to weld the 5XXX series alloys when 40,000 psi tensile strength is not a requirement. 5356 is a very good all purpose wire so it is the most widely used of all aluminum fillers metals. Common applications are welding of boats / ships, bicycles, tanks pressure vessels and automotive parts. Qualified to AWS A5.10 R5356.

 

Harris ER70S-2 Mild Steel TIG Welding Wire 3#
3 lb. tube of 36 inch lengths - Harris ER70S-2 mild steel TIG welding wire is a premium, multiple deoxidized, wire. It produces high quality welds in most grades of carbon steels. E70S-2 is a triple deoxidized wire which provides defect free weld deposits when properly used on most carbon steels. It is used especially for pipe welding. ER70S-2 Conforms to AWS A5.18 ER70S-2